Description

Single pass maintenance system which accepts a variety of implements for use on both turf and hard porous surfaces.

Up to four operations can be carried out simultaneously with this simple and versatile system.

All implements are fully interchangeable and independently adjustable to give the desired effect and can be raised out of use when not required.

Connects to any tractor with 3 point linkage and utility trucks with a towed frame (2 implements).

Quadraplay frame for 4 implements
Tri-play frame for 3 implements
Twinplay frame for 2 implements
Singleplay frame for 1 implement
  • Versatile – can be used on natural turf, synthetic turf and hard porous surfaces.
  • Fast – up to four operations carried out simultaneously
  • Agri-jacks allow implements to be used lightly or more aggressively as required
  • 183cm and 244cm working widths available
  • Quadraplay has carrying platform for hand tools, seed etc.
  • Connects to any tractor with 3-point linkage and utility trucks with suitable frame.
  • Robustly constructed and very low maintenance

Technical Specification

Implement Frames Implements

1.2m Implements

Deep Slitter – FS1162 – Relieves compaction helping to assist in the absorption of water, air and nutrients into the root zone with minimal surface disturbance. Ideal for pre-season and end of season maintenance (for towed implement frame only).
Spiker slitter – FS0561 – Fast method of surface aeration allowing air and water to percolate into the root zone. Ideal for use during the playing season and before fertilizer applications and irrigation.
Rolaspike – FS1271 – Ideal for surface aeration during the playing season allowing water and air into the root zone and  integrating fertilizer into the surface. Also useful as part of an overseeding programme.
Straight brush – FS0865B –  Used for standing grasses up, removing excess dew, enhancing presentation and brushing in dressings. Ideal on natural grass and hard porous areas.
Flexicomb (1.3m wide) – FS1163 – Ideal for standing up grasses and grooming, the easily adjusted crossbar increases or decreases the Flexicomb’s intensity.
Intermediate rake – FS1270 – 4mm diameter tines. Ideal for regular use on hard porous surfaces, gravel paths and running tracks.
Tilth rake – FS1269 – 5.5mm diameter tines. Ideal for compacted hard porous surfaces, gravel paths and running tracks.
Spring Tine Grooming Rake – FS1148 – 7mm diameter spring tines for grooming and raking. Ideal for standing grasses up to improve presentation and remove thatch, useful for creating a tilth on worn areas. Also suitable for use on hard porous surfaces.
Fine Grooming Rake – FS1272 – 5mm diameter spring tines for grooming and raking. Ideal for standing grasses up to improve presentation and remove thatch, useful for creating a tilth on worn areas. Also suitable for use on hard porous surfaces.
Roller – FS0863 – Ideal for light rolling of all surfaces and enhancing presentation. Used on natural grass and hard porous areas.

1.8m Implements

Spiker Slitter – FS0764
Rolaspike – FS1169
Straight Brush – FS0765B
Zig Zag Brush – FS0869B – Angled brush sections increase the brushing intensity. Ideal for removing dew, standing grasses up, working in top dressing and improving presentation. Ideal on natural grass and hard porous areas.
Flexicomb – FS1134 – 1.3m wide
Intermediate Rake – FS0759
Tilth Rake – FS9760
Spring Tine Grooming Rake – FS0761
Fine Grooming Rake – FS1075
Levelling Lute – FS0762 – Ideal for levelling and grading hard porous surfaces.
Roller – FS0763
Grader Plate – FS1110 – Ideal for levelling greyhound tracks or other sand based surfaces leaving a lightly compacted polished finish. 2m wide

2.4m Implements

Description
Spiker Slitter – FS0774
Rolaspike – FS1267
Straight Brush – FS0775B
Zig Zag Brush – FS0516B
Flexicomb – FS1277
Intermediate Rake – FS1268
Tilth Rake – FS1266
Spring Tine Grooming Rake – FS0771
Fine Grooming Rake – FS1076
Levelling Lute – FS0772
Roller – FS0773
Grader Plate – FS1109 – 2m wide